- Multi-parameter Water Analyzer
- Single-Parameter Water Aalyzer
- DO Sensor
- Trace DO Sensor
- CO₂ Sensor
- COD Sensor
- EC TDS Sensor
- Salinity EC TDS Sensor
- TSS Sensor
- Turbidity Sensor
- PH Sensor
- ORP
- Ion Selective Sensor
- Ammonia Nitrogen Sensor
- Oil in Water Sensor
- Blue-Green Algae Sensor
- Chlorophyll Sensor
- Residual Chlorine Sensor
- Marine Current Sensor
China TSS Analyzer for Sewage Treatment - Portable Total Suspended Solids Sensor from Leading Suppliers & Factory
| Product Name | Total Suspended Solid Analyzer (TSS Analyzer) |
| Measurement Method | 135° Backlight |
| Range | 0–50,000 mg/L | 0–120,000 mg/L |
| Accuracy | Less than ±10% of measured value (depending on sludge homogeneity) or 10 mg/L, whichever is greater |
| Power | 9–24 VDC (Recommended: 12 VDC) |
| Size | 50 mm × 200 mm |
| Material | 316L Stainless Steel |
| Output | RS-485, MODBUS Protocol |
Advanced optics and 135° scattering angle ensure globally standardized measurements for TSS and turbidity, validated across diverse water matrices.
Proprietary fiber-optic pathways and dynamic signal correction algorithms minimize errors from ambient light, temperature fluctuations, or chromatic variations.
Motor-driven cleaning brush operates at programmable intervals, preventing biofilm buildup and ensuring zero downtime in continuous monitoring scenarios.
The 316L stainless steel body withstands corrosive chemicals, high-pressure washdowns, and extreme temperatures (-20°C to 60°C), suitable for submerged or outdoor installations.
Built-in temperature and turbidity compensation algorithms enhance accuracy in dynamic environments, from rapid sediment flows to stagnant wastewater.
Optimize sludge dewatering and discharge compliance by tracking TSS in real time across chemical, pharmaceutical, or textile wastewater streams.
Deploy in rivers, lakes, or coastal zones to monitor erosion, sediment transport, and pollution events for regulatory reporting.
Ensure drinking water safety by detecting suspended particles in treatment plants or distribution networks, preventing pipeline blockages.
Maintain aquatic health by controlling suspended solids that impact oxygen levels and species survival rates.
Monitor runoff water quality to mitigate environmental risks and comply with particulate emission standards.
Support studies on water clarity, sediment dynamics, or ecological impact assessments with lab-grade precision.
| Digital RS485 Water Quality Sensors Technical Data | ||||||
| No. | Picture | Product Name | Model | Range | Accuracy | Resolution |
| 1 |  |
DO sensor | LMS-DO10B | 0-20mg/L, 0-60℃ | ±0.1-0.3mg/L | 0.01mg/L |
| 2 |  |
DO sensor | LMS-DO10C | 0-20mg/L, 0-60℃ | ±0.3mg/L | 0.01mg/l |
| 3 |  |
Trace DO sensor | LMS-TDO100 | 0-2000ppb, 0-50℃ | ±1ppb | 1ppb |
| 4 |  |
PH sensor | LMS-PH100 | 0-14pH | ±0.02pH | 0.01pH |
| 5 | |
ORP sensor | LMS-ORP100 | ±1000.0 mV | ±0.2 mV | 0.1mV |
| 6 |  |
EC/TDS sensor | LMS-TDS102 | CT: 0-9999uS/cm; 0-100mS/cm; TDS: 0-10000ppm | ±2.5%FS | 1uS/cm, 0.01mS/cm, 1ppm |
| 7 |  |
Salinity/EC/TDS sensor | LMS-SAL104 | Conductivity: 0.1-500 mS/cm; TDS: 0-60000ppm; Salinity: 0-500.00ppt | ±1.5%FS | 1uS/cm, 0.01mS/cm, 1ppm, 0.01ppt |
| 8 |  |
COD sensor | LMS-COD100 | COD: 0.1-1500mg/L; TOC: 0.1-750mg/L; BOD: 0.1-900mg/L; Turbidity: 0.1-4000NTU; Temp: 0-50℃ | ±5% equiv.KHP; Temp: ±0.5℃ | 0.01mg/L equiv.KHP |
| 9 |  |
TSS sensor | LMS-TSS100 | 0-50000mg/L / 0-120000mg/L | ±10%FS or 10 mg/L | 0.1mg/L or 1mg/L |
| 10 |  |
Turbidity sensor | LMS-TUR10L | 0-100NTU | ±10%FS or 0.3 NTU | 0.01NTU |
| 11 | |
Turbidity sensor | LMS-TUR10H | 0-3000NTU | ±10%FS or 0.3 NTU | 0.01NTU |
| 12 |  |
CO2 sensor | LMS-CO2100 | 2000PPM / 10000PPM / 50000PPM | ±5%FS | 1ppm |
| 13 |  |
Ammonia Nitrogen sensor | LMS-NH4100 | 0-1000 mg/L | ±5%FS | — |
| 14 | |
Ion Selective sensor | LMS-ION100 | 0-1000 mg/L | ±5%FS | — |
| 15 | |
Oil in Water sensor | LMS-OIL100 | 0-50 mg/L; 0-5 mg/L | ±3%FS | 0.01ppm |
| 16 | |
Chlorophyll sensor | LMS-CHL100 | 0-500ug/L | ±3%FS | 0.1ug/L |
| 17 | |
Blue-Green Algae sensor | LMS-BGA100 | 0-2,000,000 cells/ml | ±3%FS | — |
| 18 |  |
Residual Chlorine sensor | LMS-HCLO100 | 0-20.00 ppm | ±5%FS | 0.001 / 0.01ppm |
| 19 |  |
Marine Current sensor | LMS-Current100 | Temp: -3℃–45℃; Velocity: 0-500 cm/s; Direction: 0-359.9° | ±0.05℃; ±1 cm/s or ±2%; ±2° | Temp: 0.001℃; Velocity: 0.1 cm/s; Direction: 0.1° |
| Water Quality Analyzer Equipment | ||||||
| No. | Picture | Product Name | Model | Size | Power | Display Output |
| 20 |  |
Portable DO Analyzer | LMS-PA100 | 100mm × 204mm | <0.5W; 7.5V, 5 batteries | LCD display screen |
| 21 |  |
Multi-parameter Portable Water Analyzer | LMS-PA100P | 220mm × 120mm × 100mm | Rechargeable lithium battery with 220V DC charging adapter | LCD display screen |
| 22 |  |
Multi-parameter Touch-screen Online Analyzer | LMS-OA200T | 180mm × 230mm × 100mm | AC power supply: 220 VAC | 7-inch touch screen |
